Dry powder two-dimensional motion mixer 2D mixer

Description of Powder 2D Mixer:
The two-dimensional motion mixer mainly consists of three parts: a rotary drum, a swing frame, and a frame. The rotary drum is installed on the swing frame, supported by four rollers and axially positioned by two gears. Among the four supporting rollers, two of them rotate and are dragged by the rotational power system to rotate the rotary drum. The swing frame is installed on the frame by a set of crank swing rod mechanisms, and the swing frame is supported on the frame by bearing components. The rotary drum of a two-dimensional motion mixer can move in two directions simultaneously, one is the rotation of the rotary drum, and the other is the swinging of the rotary drum with the swinging frame. The mixed materials rotate, flip, and mix inside the rotary drum, while also undergoing left and right back and forth mixing movements with the swing of the drum. Under the combined action of these two movements, the materials are fully mixed in a short period of time.

Features of Powder 2D Mixer:
1. The equipment material barrel is made of SUS304 stainless steel material and welded by argon arc. One end is a quick connect cover door for the inlet, and the other end is a butterfly valve for the outlet. Add a flipping plate inside the cylinder without dead corners, and the outer bracket flange is made of stainless steel material. 

2. The main frame of the equipment adopts A3 channel steel combination welding, which is divided into the main frame and the mixing cylinder rocking frame. The outer part of the frame is made of SUS304 stainless steel plate. 

3. The equipment is divided into mixed rotation and shaking transmission, and the mixed rotation electronic control is divided into forward and reverse. The electronic control of the shaking transmission is divided into constant motion and jog motion. 

4. The support wheel of the material barrel is made of resin material, which is corrosion-free and has a long service life. 

5. The circuit control is a separate control box installed on the side of the equipment, which contains an electrical component box for controlling mixed rotation and shaking transmission made of SUS304 stainless steel plate.