High Efficiency Fluid Bed Dryer Powder Drying Machine

1. General description of High Efficiency Fluid Bed Dryer

GFG series high efficiency Fluidized Bed Dryer is a batch type drying machine which has been widely used in foodstuff, chemical, feedstuff, health products industry and so on for drying powder and granule materials.

The heated and filtered air is guided into by the draught fan and passed through the screen plate of the hopper. In the working room, the air forms to fluidization state through mixing and negative effect. The moisture will be quickly evaporated and removed, and the materials can be rapidly dried.

3. Features of High efficiency fluid bed dryer

1. GFG high efficiency fluidized bed dryer adopts prototype structure, its interior is fine polished in order to avoid dead angle.
2. The hopper with mixing function can avoid forming channel when wet materials are agglomerated and dried.
3.  This fluidized bed dryer uses overturning discharge method, which is easy and convenient to unload the materials. The automatic feed and discharge system can be designed with your requirements.
4.  GFG high efficiency fluidized bed dryer has rapid drying rate and uniform temperature, so the drying time of each batch is about 20 to 60 minutes.
5.  This fluidized bed dryer operates under closed negative pressure, and the air flow is filtered. Therefore, this machine is easy to handle and convenient to clean.

4. Structure of High efficiency Fluid bed dryer

High efficiency fluidized bed dryer consists of air filter, heating, inlet air pipe, air distribution chamber, fluid bed, dust remove chamber, exhaust air pipe, exhaust fan, silencer and control cabinet.

5.1. Air filter of high efficiency fluid bed dryer:

Filter includes primary, middle and high efficient filter (HEPA filter). It can make sure the purification achieves 100000 degrees. And there is a meter that can show the pressure differential before and after the high efficient filter, so we can know the resistance in time.

5.2. Heating system of high efficiency fluid bed dryer:

In general, the heating source is steam, thermal oil, electricity, hot water, oil, gas and so on. The heating system uses PID technology to ensure that the temperature fluctuation range is controlled within ±2℃. To ensure dried material is cooled timely, a cooling system is optional to achieve online cooling function.

5.3. Main machine of high efficiency fluid bed dryer:

5.3.1. The bag dust collector can remove dust continuously when the dryer is working. We can set dust remove time and interval time, so the dust removing efficiency and fluidized efficiency is good. The bag is static-free type, the static electricity appears during the drying process can be eliminated, so the material is not to stick on the bag. There is differential pressure display device for the bag, so we can clean or replace the bag in time.

5.3.2. The equipment is round sealed structure, there is no dead angle. So it is convenient to clean the machine and there is no cross contamination, and confirms GMP requirements.

5.3.2. The air distributing plate is special designed, air is well-distributed, material fluidized efficiency is good. Perforated plate is quick-install type, it is convenient to clean and maintain.

5.3.3. Adopts air cylinder type sealing and air bag sealing structure, seal is stable and operation is easy.

5.4. Exhaust air system of high efficiency fluid bed dryer:

It consists of exhaust air pipe, exhaust fan and silencer. Exhaust fan and main machine are installed separately, and the noise is ≤75dB. The rotary speed of exhaust fan is regulated by inverter, so it is convenient to adjust the air volume for different materials.

5.5. Control system of high efficiency fluid bed dryer:

Control system is PLC & Touch screen type, operation is convenient and stable. There is strict interlock function, so there will be no incorrect operation. There are temperature and pressure measure and display devices, inlet air temperature is controlled by PID control technology.

6. Parameters of High efficiency fluid bed dryer