Description of Horizontal Ribbon Mixer:
The spiral belt mixer has revolutionized the mixing of powder-powder, powder-liquid, solid materials and granular materials in the traditional process. It features high speed, high efficiency, easy operation, convenient cleaning and pollution-free, marking the significant progress of modern technology, which is widely used in the industries of tobacco, food (such as milk tea, instant tea powder, food additives, flavors and spices, condiments, soybean protein isolate spray lecithin, etc.), veterinary drugs, modified starch, papermaking, chemical industry, feed, CPE plastic particles, etc.
Work principle of Horizontal Ribbon Mixer:
Horizontal ribbon mixer is mainly combined with mixing barrel, agitator, driven unit. Untwist double ribbon are swirled with the main shaft in the U shape barrel. The outer ribbon push the material from the two ends to the centre, inner ribbon push the material from center to the two ends. Thus to achieve material convention. The discharging port is set in the bottom centre, with the help of the outer ribbon, the material can be discharged completely, and no dead zone.
Features of Horizontal ribbon mixer:
1. Convenient cleaning: timely, convenient and fast cleaning and cleaning of the equipment in each batch and shift without any dead corner
2. High mixing uniformity: it can make materials with a ratio of 1:10000 evenly mixed, especially for materials with large specific gravity characteristics. Users have done field tests, mixing 700kg of flour and about 5kg of red powder in 10 minutes. After sampling and testing in every corner, the mixing uniformity is very high. Compared with other mixers, the mixing uniformity is much higher!
3. Fast mixing speed and high efficiency: generally, each batch of materials is fully mixed and stirred in 1-10 minutes, which is 6-10 times or higher than that of other mixers.
4. Fast and convenient discharging: usually a batch of materials is discharged in 1~2 minutes. During the user's field test, the discharging time of 700kg flour was 47 seconds.
5. Large loading capacity: the loading capacity (loading factor) of the equipment is usually more than 70%.
6. Less residue: users have always believed that the residue of horizontal equipment is large, which is not the case. Because the gap between the outer screw belt and the U-shaped cylinder wall is very small during the processing, and the screw belt is always running when discharging, so that the material moves towards the discharge valve, and basically all the light is discharged. In the field test, 700kg flour remained in 5kg.
7. Meet vacuum feeding and dust-free discharging, and avoid dust flying during the whole feeding, mixing and discharging process.
8. The mixing process is mild and the original state of the material is basically not destroyed.
9. No pollution to materials: the mixing mechanism of the equipment is integral, safe and reliable, and all corner welds transition smoothly, Easy to clean; The lubrication part is located outside the barrel, without oil drops and debris penetrating into the material. It can be sealed to prevent dust in the air from entering the material.
10. Low requirements for the plant: the equipment is horizontal, and various forms of driving devices and discharge positions can be selected arbitrarily, which is not restricted by the height and floor area of the plant.
11. The equipment operates stably and reliably, with less vulnerable parts, long service life, convenient maintenance and simple operation.
Parameters of Horizontal ribbon mixer:
Contact Now
