Continuous fluid bed dryer Horizontal fluidized bed dryer

Fluid Bed Dryer is also called Fluidized Bed Dryer. Through operation and improvement for about twenty years, it has played an active part in fields of pharmaceutical, chemical, foodstuff, grain and so on. It consists of an air filter, fluidizing bed, cyclone separator, dust remover of bag, high-speed centrifuge and fan, operation table, and so on. Because of the difference of property from raw material, it is necessary to equip dust remover in accordance with practical needs. It may select cyclone separator and dust remover at the same time or one of them. In general speaking, cyclone separator can be selected if the raw material is large and the dust remover of the bag may be selected if the raw material is light. Moreover, there is air feeding device for your selection.

The clean and hot air enters into fluidization bed through distributor of valve plate. The wet material fed from feeder will be
formed a fluidization state by hot air (jumping within the bed like boiling water), so it is called fluidizing dryer(or machine).Because of the large contacting area between hot air and materials, the drying time is short. The air enters from one end of bed, through" boiling" several minutes and then comes out automatically from the other end.

3. Features of Horizontal fluid bed dryer:

1. Automatic production can be realized. Continuous Horizontal Fluid Bed Dryer is continuous Drying Equipment.
2. It is quick in drying speed, Low in drying temperature ,
3. Horizontal Fluidized Bed Dryer has highly polished inner and outer surfaces of the machine, no dead comer, easy to clear, no cross contamination. Confining to the requirement of GMP.
4. Horizontal Fluidizing Drying Machine have high collecting rate, high efficiency, fast drying, energy saving.
5. It have not stick onto the wall.
6. Smooth running, reliable performance, easy operation.
7. When oil is used to heat, use automatic constant temperature control. Its temperature of operation can be adjusted form 50-160ºC.
8. Machine materials: AISISUS304 , AISISUS316L, and other material .
9. The feeding system for this machine can be by manual or screw feeder, because the machine is negative pressure drying process, and the feeding materials also can use negative pressure to suck the raw materials into dryer.
10. For the electrical component, we mainly use international brand such as ABB ,Siemens or Schneider.
11. Control system has more choices, such as push button , HMI+PLC and so on.

4. Technical parameters of Horizontal fluid bed dryer